中华人民共和国进口计量器具监督管理办法 MEASURES OF THE PEOPLES REPUBLIC OF CHINA FOR THE SUPERVISION AND ADMINISTRATION

国家技术监督局令第三号
（Approved by the State Council on October 11， 1989 and promulgated by the Decree No. 3 of the State Bureau of Technology Supervision on November 4， 1989）
颁布日期：19891104 　实施日期：19891104 　颁布单位：国家技术监督局

　　Chapter I General Provisions

　　Article 1 These Measures are formulated， in accordance with the pertinent stipulations of the Metrology Law of the People's Republic of China and the Rules for the Implementation of the Metrology Law of the People's Republic of China， for the purpose of strengthening the supervision over the administration of imported instruments of measurement.

　　Article 2 Any units and individuals that are engaged in the importation of instruments of measurement and any foreign businessmen （including foreign manufacturers， salesmen， the same hereinafter） or their agents who are engaged in the sales of instruments of measurement in China must abide by these Measures.

　　Article 3 The competent administrative department under the State Council shall be responsible for the supervision over and administration of imported instruments of measurement. The departments concerned under the State Council and in the local governments shall be responsible for the actual implementation in keeping with the division of responsibility.

　　Chapter II Model Approval of Imported Instruments of Measurement

　　Article 4 Anyone who wants to import the instruments of measurement listed in the Catalogue of Model Examination of the People's Republic of China for Imported Instruments of Measurement attached to these Measures or any foreign businessman who wants to sell these instruments in China must apply to the competent department in charge of measurement under the State Council for model approval.

　　Applications for model approval for imported instruments should be submitted by foreign businessmen.

　　Applications for model approval for instruments sold by foreign businessmen in China should be submitted by the foreign businessmen or their agents.

　　The competent department in charge of measurement under the State Council may， according to changes of circumstances， make minor adjustments of the Catalogue of Model Examination of the People's Republic of China for Imported Instruments of Measurement.

　　Article 5 In applying for model approval， foreign businessmen or their agents must submit model approval application， photographs or the sample instruments and necessary technical data to the competent department in charge of measurement under the State Council. The competent department under the State Council shall conduct examination of the materials submitted by foreign businessmen or their agents according to the relevant provisions of the measurement law and regulations.

　　Article 6 After receiving applications， the competent department under the State Council shall arrange for an authorized technical agency to conduct design appraisement and inform the foreign businessmen or their agents that they should provide the technical agency with sample instruments and the following technical data：

　　（1） the technical manuals of the instruments；

　　（2） the assembly diagrams， structural drawings and circuit diagrams of the instruments；

　　（3） the documents of technical standards and the methods for examination；

　　（4） the testing reports on the sample instruments；

　　（5） the operation instructions.

　　The sample instruments needed in the design appraisement should be provided free of charge by the foreign businessmen or their agents.

　　Customs authorities shall inspect and release the instruments on the strength of the letters of guarantee issued by the competent department in charge of measurement under the State Council and shall impose no customs duties. The sample instruments shall be returned to the applicants after the appraisements.

　　Article 7 Design appra

isement shall be conducted in accordance with the requirements laid down in the appraisement outline which is drawn up by the technical agency responsible for the appraisement according to the Technical Specifications of Design Appraisement for Instruments of Measurement issued by the competent administrative department under the State Council.

　　Its main content includes inspection of the exterior assessment of measurement functions， safety， adaptability to environment， reliability and service life.

　　Article 8 The results of the design appraisement shall be reported by the technical agency responsible for the appraisement to the competent administrative department under the State Council for verification. Those applicants whose instruments have passed such examination and verification shall be issued with the Certificate of Approval of the People's Republic of China for Designs of Imported Instruments of Measurement by the competent administrative department under the State Council and shall be allowed to use the marks and serial numbers of the People's Republic of China for design approval on the corresponding instruments and their packages.

　　Article 9 The technical agencies responsible for design appraisement and their personnel must keep secret the technical data provided by applicants.

　　Article 10 Applications for temporary model approvals for instruments， which fall into any of the following categories， can be made with prior consent of the competent administrative department under the State Council， which shall stipulate the relevant procedures：

　　（1） those instruments reserved for sale after exhibitions；

　　（2） those instruments which are indeed urgently needed；

　　（3） those instruments whose sales volume is extremely small；

　　（4） those instruments for which China is incapable of carrying out design appraisement for the time being.

　　Article 11 Those instruments of measurement produced in foreign countries which have obtained design approvals in our country shall be made public by the competent department under the State Council.

　　Chapter III Examination and Approval of Imported Instruments of Measurement

　　Article 12 Applications to import instruments of measurement must be examined and approved according to the procedures stipulated by the state concerning imported commodities. The relevant competent administrative departments for examination and approval and the special departments in charge of examination shall conduct examination of official measures for instruments of measurement to be imported， which are listed in the Catalogue of the People's Republic of China Concerning Instruments of Measurement Controlled by Law and must ensure that the instruments of measurement to be imported according to the provisions of Article 4 of these Measures pass model approval. If the relevant instruments fail to pass the examination， the departments responsible for examination and approval may not approve of import of them and foreign trade departments may not order the goods.

　　The Customs shall inspect and release imported instruments of measurement on the strength of the documents of approval issued by the department responsible for examination and approval.

　　Article 13 Applications， as required by special needs， to import instruments of non- official measures or those instruments which have been prohibited by the State Council must be subject to approval of the administrative department for measurement under the State Council.

　　Article 14 The units which apply to import instruments of non-official measures or those instruments which have been prohibited by the State Council should provide the following materials and documents to the administrative department for measurement under the State Council：

　　（1） applications；

　　（2） the functions and technical standards of the instruments；

　　（3）

the photographs and operation instructions of the instruments；

　　（4） the documents of approval issued by the competent authorities above the applying units.

　　Chapter IV Examination and Determination of Imported Instruments of Measurement

　　Article 15 Those units which import， for sale on the domestic market， instruments as listed in the Catalogue of the People's Republic of China Concerning the Instruments of Measurement Controlled by Law must， after the inspection and release by the Customs， apply for examination and determination to the administrative departments for measurement in the people's governments of their respective provinces， autonomous regions or municipalities directly under the Central Government. If it cannot be done locally， they may apply to the administrative department for measurement under the State Council for examination and determination.

　　Article 16 The government administrative departments for measurement which deal with applications for examination and determination of imported instruments of measurement shall appoint agencies for prompt measurement examination and determination. If the instruments pass the examination and determination， the government administrative departments shall issue certificates of examination and determination and certificates of quality or affix stamps and allow their sales.

　　Article 17 The units ordering such instruments shall report the result of examination and determination to the local commodity inspection agencies. In case the instruments fail to pass the examination and determination and therefore give rise to the necessity to claim compensation from foreign suppliers， the units should apply in time to the local commodity inspection agencies for re-inspection certificates. Article 18 Those instruments

┨网页设计特效库┠ http://www。z┗co⊙l。com/网页特效/